This manual PDF download describes procedures for operation, handling, lubrication, maintenance, checking, and adjustment for the Komatsu WA420 avance Wheel Loader. It will help the operator or anyone realize peak performance through effective, economical and safe machine operation and maintenance.
APPLICABLE MODELS :
Komatsu WA420 avance Loader
Serial Numbers : 54001 and up
TABLE OF CONTENTS :
COVER
1. FOREWORD
2. SAFETY INFORMATION
3. INTRODUCTION
4. LOCATION OF PLATES,TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
5. CONTENTS
SAFETY
- 6. GENERAL PRECAUTIONS
- 7. PRECAUTIONS DURING OPERATION
- - 7.1 BEFORE STARTING ENGINE
- - 7.2 AFTER STARTING ENGINE
- - 7.3 TRANSPORTATION
- - 7.4 BATTERY
- - 7.5 TOWING
- 8. PRECAUTIONS FOR MAINTENANCE
- - 8.1 BEFORE CARRYING OUT MAINTENANCE
- - 8.2 DURING MAINTENANCE
- - 8.3 TIRES
- 9. POSITION FOR ATTACHING SAFETY LABELS
OPERATION
- 10. GENERAL VIEW
- - 10.1 GENERAL VIEW OF MACHINE
- - 10.2 GENERAL VIEW OF CONTROLS AND GAUGES
- 11. EXPLANATION OF COMPONENTS
- - 11.1 MACHINE MONITOR
- - 11.2 SWITCHES
- - 11.3 CONTROL LEVERS,PEDALS
- - 11.4 STEERING COLUMN TILT LEVER
- - 11.5 CAP WITH LOCK
- - 11.6 SAFETY BAR
- - 11.7 TOWING PIN
- - 11.8 GREASE PUMP
- - 11.9 BACKUP ALARM
- - 11.10 FUSE
- - 11.11 SLOW-BLOW FUSE
- - 11.12 STORAGING PLACE OF THIS MANUAL
- - 11.13 TAKING OFF POWER
- - 11.14 TAKING OFF POWER (WITH ROPS CAB)
- 12. OPERATION
- - 12.1 CHECK BEFORE STARTING ENGINE
- - 12.2 STARTING ENGINE
- - 12.3 OPERATIONS AND CHECKS AFTER STARTING ENGINE
- - 12.4 MOVING MACHINE OFF
- - 12.5 CHANGING GEAR SPEED
- - 12.6 CHANGING DIRECTION
- - 12.7 TURNING
- - 12.8 STOPPING MACHINE
- - 12.9 OPERATION OF WORK EQUIPMENT
- - 12.10 WORK POSSIBLE USING WHEEL LOADER
- - 12.11 PRECAUTIONS FOR OPERATION
- - 12.12 ADJUSTING WORK EQUIPMENT POSTURE
- - 12.13 PARKING MACHINE
- - 12.14 CHECKS AFTER COMPLETION OF OPERATION
- - 12.15 STOPPING ENGINE
- - 12.16 CHECK AFTER STOPPING ENGINE
- - 12.17 LOCKING
- - 12.18 HANDLING THE TIRES
- 13. TRANSPORTATION
- - 13.1 LOADING,UNLOADING WORK
- - 13.2 PRECAUTIONS FOR LOADING
- - 13.3 PRECAUTIONS FOR TRANSPORTATION
- - 13.4 PRECAUTIONS FOR TRANSPORTATION
- 14. COLD WEATHER OPERATION
- - 14.1 PRECAUTIONS FOR LOW TEMPERATURE
- - 14.2 PRECAUTIONS AFTER COMPLETION OF WORK
- - 14.3 AFTER COLD WEATHER
- 15. LONG-TERM STORAGE
- - 15.1 BEFORE STORAGE
- - 15.2 DURING STORAGE
- - 15.3 AFTER STORAGE
- 16. TROUBLESHOOTING
- - 16.1 WHEN MACHINE RUNS OUT OF FUEL
- - 16.2 TOWING THE MACHINE
- - 16.3 IF BATTERY IS DISCHARGED
- - 16.4 OTHER TROUBLE
MAINTENANCE
- 17. GUIDES TO MAINTENANCE
- 18. OUTLINES OF SERVICE
- - 18.1 OUTLINE OF OIL,FUEL,COOLANT
- - 18.2 OUTLINE OF ELECTRIC SYSTEM
- 19. WEAR PARTS LIST
- 20. USE OF FUEL,COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
- 21. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
- - 21.1 INTRODUCTION OF NECESSARY TOOLS
- - 21.2 TORQUE LIST
- 22. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
- 23. MAINTENANCE SCHEDULE CHART
- - 23.1 MAINTENANCE SCHEDULE CHART
- 24. SERVICE PROCEDURE
- - 24.1 INITIAL 250 HOURS SERVICE
- - 24.2 WHEN REQUIRED
- - 24.3 CHECK BEFORE STARTING
- - 24.4 EVERY 50 HOURS SERVICE
- - 24.5 EVERY 100 HOURS SERVICE
- - 24.6 EVERY 250 HOURS SERVICE
- - 24.7 EVERY 500 HOURS SERVICE
- - 24.8 EVERY 1000 HOURS SERVICE
- - 24.9 EVERY 2000 HOURS SERVICE
- - 24.10 EVERY 4000 HOURS SERVICE
SPECIFICATIONS
- 25. SPECIFICATIONS
OPTIONS,ATTACHMENTS
- 26. OPTIONAL PARTS AND ATTACHMENTS
- 27. SELECTING BUCKETS AND TIRES
- 28. CAR RADIO
- - 28.1 EXPLANATION OF COMPONENTS
- - 28.2 METHOD OF USE
- - 28.3 PRECAUTIONS WHEN USING RADIO
- 29. AIR CONDITIONER
- - 29.1 GENERAL LOCATIONS AND FUNCTION OF CONTROL PANEL
- - 29.2 METHOD OF OPERATION
- - 29.3 COOL BOX
- 30. HANDLING E.C.S.S. (ELECTRONIC CONTROLLED SUSPENSION SYSTEM)
- - 30.1 METHOD OF OPERATING E.C.S.S.
- - 30.2 PRECAUTIONS WHEN OPERATING E.C.S.S. SWITCH
- 31. HANDLING AUTO-GREASING SYSTEM
- - 31.1 METHOD OF OPERATING AUTO-GREASING SYSTEM
- - 31.2 PRECAUTIONS WHEN HANDLING AUTO-GREASING SYSTEM
- - 31.3 TROUBLESHOOTING
- - 31.4 SPECIFICATIONS
- 32. OPTION DISPLAY
- 33. HANDLING AUTO-LEVELING,REMOTE POSITIONER
- - 33.1 STRUCTURE AND FUNCTION OF AUTO-LEVELING,REMOTE POSITIONER
- - 33.2 GENERAL LOCATIONS
- - 33.3 METHOD OF OPERATING AUTO-LEVELING,REMOTE POSITIONER
- - 33.4 ADJUSTING AUTO-LEVELING,REMOTE POSITIONER
MANUAL SPECIFICATION :
File Format : PDF
Language : English
Total Pages : 232
Bookmarked : Yes
Searchable : Yes
Printable : Yes
Part Number : SEAM031401P
More Info : https://www.sitelux.com
Komatsu WA420 avance Wheel Loader Operation & Maintenance Manual - SEAM031401P.pdf